Thursday, 9 February 2012

Alternatives (NGV and Hybrid)

There are alternatives from fully using petrol or diesel. These options are NGV and Hybrid. NGV means Natural Gas Vehicle. Hybrid technology utilizes the use of electricity supplied by a battery powering the electric motor coupled with the torque produced by the fuel-burning engine.

In Malaysia, the NGV technology comes in first before the hybrid. Most road users that travelled long distances everyday uses NGV such as taxi cabs and company MPVs (Multi-purpose vehicles). They install a pressure vessel (tank) inside the car which stores the natural gas which currently only supplied by certain Petronas petrol stations. This method where natural gas is considered cheaper than petrol, is providing the users low fuel costs which compensated by slower pickup and power. Other than that, the choice of using NGV also occupies some space in the boot and the installation of NGV is rather expensive.

A person should calculate the breakeven of the cost to the savings from NGV before opting for the installation of NGV. Besides, one should not be tempted by cheaper installation of NGV by certain unlicensed parties because there have been many cases of explosions due to improper installation of NGV.

Hybrid is somehow considered as a rather luxurious option for users. Hybrid cars that uses battery power are fitted with some of the latest technologies and these features come with a price. Fortunately, we have hybrid car tax waive by the Malaysian government in support of green technology. However, this waiver only applies to hybrid cars with lower cc, such as current  Honda Insight 1.3L and Toyota Prius 1.8L. These cars claimed to be hybrid cars with the use of a separated battery fitted in the car which propels the electric motor.

Although with the tax waive, Honda Insight 1.3L is priced at RM100k while Toyota Prius 1.8L is priced at RM140k+. For capable buyers, these prices are good investments which yields low fuel consumption, standard safety and other technological advance features. However, for less capable buyers, the price of the car is already rather too high to own one even though it's a green move for the environment to use the car that provides more mileage and less Carbon Dioxide emission for every km.

These alternatives are sure to be tempting. Paying extra 50k to get a hybrid car, instead of having 50k used for buying fuel? Paying extra 7k to get NGV installed, occupying space and carrying potential danger? In the end, it's our wallet that decides our next move.

Wednesday, 8 February 2012

Measurement Methods for Fuel Consumption

In relation to the previous post, "Importance", we spoke about choices of car regarding calculation of fuel consumption.

Of course, we don't get a constant rate of fuel consumption for a particular car. It depends very much on how we drive the car, where we drive the car and many other factors. We will cover the factors later in other posts.

So, how do we calculate fuel consumption rate for our cars?
There are a few common methods that many 'sifus' out there using to measure the performance of their cars.

  1. Liter/100km (e.g. 6.6L/100km)
  2. Km/Liter (e.g. 15.2km/L)
  3. RM/km (e.g. RM0.125/km)

The options "a,b,c" are actually interconnected. Just a matter of calculation.
For an accurate method of measurement, we pump fuel into our car until first click, indicating that the fuel tank is full. Then we go travelling until the next time we pump the fuel back to first click.

Taking the example of a car pumped to full first click and went travelling 407km on the highway. Then it goes to the petrol station and pumped back to full first click which cost RM57.00 or 30 liters of fuel (Current market price for RON95 petrol in Malaysia is RM1.90/liter)

For method 'C', take the amount (RM) of fuel pumped and divide with the mileage travelled.
Then, we get how much RM / km travelled.
Example: RM57 pumped divided by 407km travelled will give us RM0.14/km

This method is sometimes inaccurate for comparison because fuel prices may fluctuate from time to time. Therefore, it is better to opt for choice 'B' or 'A' or when using method 'C', remember to state the rate of the current fuel price.

For method 'A', take the amount (liter) of fuel pumped and divide with the mileage travelled then multiplied by 100.
Then, we get how many liter of fuel L/100km travelled.
Example:  30 liters pumped divided by 407km travelled and multiply by 100 will give us 7.37Liter/100km
I personally prefer this method where the lower the liters of fuel used, the better the fuel economy the car is. Many car performance specification sheet also use this measurement method.

For instance, the best my car ever achieved is 6.5L/100km when I drive my 1.6L Hi-line Proton Persona 2009 on highway from KL to Penang while the worst is 11L/100km when I drive it in city area with constant traffic jams in KL.

For method 'B', take the mileage travelled and divided with the amount (liter) of fuel pumped.
Then, we get how many km / liter of fuel pumped.
Example: 407km divided with 30 liters of fuel pumped will give us 13.57km/Liter.
Many forummers use this indication to measure their cars' performance. The higher the mileage per liter, the better the fuel economy the car is.

Importance about Fuel Consumption

Greetings, my friends, loyal readers and other guests. Today I will be sharing my own researches and ideas (taken from articles, experienced on the road, taught by others through sharing on forum etc) about fuel consumption.

Why is fuel consumption important for road users like us?
It all comes back to the money matters. The more fuel we use, the more money we have to fork out to buy it. A car's fuel consumption (as in a fluctuating rate of calculation) is the measurement term that we use to indicate the car's performance in fuel saving or fuel guzzling. For a certain mileage, a fuel economy car will use a little fuel while a fuel guzzling car would have burnt off a lot of fuel.